Exploring the role of the spacers and acceptors on the triphenylamine-based dyes for dye-sensitized solar cells

Six triphenylamine-based dyes were explored for their application in dye-sensitized solar cells (DSSCs). Dyes 1–3 and dyes 4–6 possess cyanoacrylic acid (C-acceptor) and rhodanine-3-acetic acid (R-acceptor), respectively. Stilbene (in dyes 2 and 5) and bis(styryl)benzene (in dyes 3 and 6) were used as π-spacers. There is no π-spacer in the dye 1 and 4. To elucidate the role of π-spacers, optical, electrochemical, and photovoltaic properties of the dyes were studied. Among C-acceptor dyes, dye 2 exhibits the highest light-to-electricity conversion efficiency of 4.45%, followed by dye 3 (4.16%). Similarly, among R-acceptor dyes, dye 5 is the best. These results indicate that stilbene is a better π-spacer over bis(styryl)benzene. Although bis(styryl)benzene could extend the light absorption range (in dye-adsorbed TiO₂ film), its tendency to promote intermolecular π-π stacking is possibly the reason for its poor performance in DSSCs. Furthermore, the conjugation break in the R-acceptor moiety attached to the TiO₂ surface limits the electron injection of R-acceptor dyes poorer than C-acceptor dyes. Density functional theory calculations were performed for the dye-(TiO₂)₈ cluster, assuming a bidentate chelation of a carboxylic acid group with Ti⁴⁺ of TiO₂ anatase. The natural bond orbital (NBO) analysis indicated relatively more electron-accepting ability of cyanoacrylic acid over rhodanine-3-acetic acid.     

Direct model-based predictive control scheme without cost function for voltage source inverters with reduced common-mode voltage

This paper presents a direct model-based predictive control scheme for voltage source inverters (VSIs) with reduced common-mode voltages (CMVs). The developed method directly finds optimal vectors without using repetitive calculation of a cost function. To adjust output currents with the CMVs in the range of –V_dc/6 to +V_dc/6, the developed method uses voltage vectors, as finite control resources, excluding zero voltage vectors which produce the CMVs in the VSI within ±V_dc/2. In a model-based predictive control (MPC), not using zero voltage vectors increases the output current ripples and the current errors. To alleviate these problems, the developed method uses two non-zero voltage vectors in one sampling step. In addition, the voltage vectors scheduled to be used are directly selected at every sampling step once the developed method calculates the future reference voltage vector, saving the efforts of repeatedly calculating the cost function. And the two non-zero voltage vectors are optimally allocated to make the output current approach the reference current as close as possible. Thus, low CMV, rapid current-following capability and sufficient output current ripple performance are attained by the developed method. The results of a simulation and an experiment verify the effectiveness of the developed method.     

Solution-Processed Organic Solar Cells with High Open-Circuit Voltage of 1.3 V and Low Non-Radiative Voltage Loss of 0.16 V

Compared with inorganic or perovskite solar cells, the relatively large non-radiative recombination voltage losses (ΔV_non-rad) in organic solar cells (OSCs) limit the improvement of the open-circuit voltage (V_oc). Herein, OSCs are fabricated by adopting two pairs of D–π–A polymers (PBT1-C/PBT1-C-2Cl and PBDB-T/PBDB-T-2Cl) as electron donors and a wide-bandgap molecule BTA3 as the electron acceptor. In these blends, a charge-transfer state energy (E_CT) as high as 1.70–1.76 eV is achieved, leading to small energetic differences between the singlet excited states and charge-transfer states (ΔE_CT ≈ 0.1 eV). In addition, after introducing chlorine atoms into the π-bridge or the side chain of benzodithiophene (BDT) unit, electroluminescence external quantum efficiencies as high as 1.9 × 10⁻³ and 1.0 × 10⁻³ are realized in OSCs based on PBTI-C-2Cl and PBDB-T-2Cl, respectively. Their corresponding ΔV_non-rad are 0.16 and 0.17 V, which are lower than those of OSCs based on the analog polymers without a chlorine atom (0.21 and 0.24 V for PBT1-C and PBDB-T, respectively), resulting in high V_oc of 1.3 V. The ΔV_non-rad of 0.16 V and V_oc of 1.3 V achieved in PBT1-C-2Cl:BTA3 OSCs are thought to represent the best values for solution-processed OSCs reported in the literature so far.     

超级电容器用solvent-in-salt型电解液的研究进展

Solvent-in-salt (SIS)型电解液作为一类新型超浓缩电解液，主要由水或者有机溶剂和易溶盐组成，具有溶液溶剂化程度小、自由溶剂分子少、电化学窗口宽、电化学稳定性高等特点，在超级电容器中显示了独特的优势并展现了良好的应用前景。本文重点综述了SIS型电解液的原理和优势，梳理了近年来SIS作为超级电容器电解液的研究进展，总结了其存在的问题，同时展望了SIS型电解液未来的发展方向。     

计及损耗的双馈感应风力发电机高电压穿越控制策略

利用换向原理分析其电磁暂态特性，在此基础上，对DFIG输出无功功率与其铜损耗的解析关系进行了理论分析，推导出了使铜损耗最低的DFIG输出无功功率最优参考值。同时，转子的瞬时功率补偿分量减小了DC总线电压的波动，从而减少了转换器的功率损耗。由此，提出了考虑DFIG铜损和转换器损耗的DFIG高电压穿越控制策略。仿真结果表明，该控制策略可以在保证DFIG高电压穿越能力的同时降低DFIG铜损耗与换流器损耗，并具有较好的暂态特性。     

New titanium (III) phosphite structure and its application as anode for lithium ion batteries

A new titanium (III) phosphite Ti₂(HPO₃)₃, has been synthesized under hydrothermal conditions. The solid-state structure of this material was solved using single-crystal X-ray diffraction. The anionic inorganic skeleton has a three-dimensional structure, which is built up by TiO₆ octahedral units linked together via bridging HPO₃ pseudo pyramids, giving rise to tunnels along the three crystallographic axes. This new compound displays a high thermal stability limit of 625 °C. IR and Raman spectroscopies show the vibrational modes of the (HPO₃)²⁻oxoanions. Electrochemical activity of this phase toward reversible insertion of Li ion was studied for the first time by galvanostatic charge-discharge measurements, an insertion host for reversible accommodation of Li⁺ was observed.     

Experimental investigation on the voltage uniformity for a PEMFC stack with different dynamic loading strategies

The operating life of the proton exchange membrane fuel cell stack is mainly decided by performances of its weakest single cell because of the “Buckets effect”, thus high voltage uniformity during a dynamic loading process is key to the stack durability. In this work, a 3-kW stack is examined experimentally on its voltage uniformity (voltage coefficient variation (Cv)) under conditions of loading from open-circuit state (0 A) to nominal current (165 A) and stack temperatures of 30 °C, 45 °C and 65 °C. Different dynamic loading strategies, namely constant loading rate strategy, decreasing loading rate strategy, and increasing loading rate (square/cube increasing loading rate) strategy, are examined and compared. Results display that during the loading process, (a) the voltage uniformity rises abruptly and goes down quickly when the loading current is small (e.g. from 0 A to 22 A), (b) the voltage uniformity under a small loading current is better than that under the open-circuit state, and (c) voltage uniformity decreases as the loading current increases from a small value to the nominal current. Comparisons of different current loading strategies show that as the stack temperature rises from 30 °C to 65 °C, the stack Cv value under the open-circuit state increases from 1.12 to 1.84 and decreases from 3.85 to 2.45 in the nominal current state. The maximum Cv for the decreasing loading rate strategy decreases from 16.25 to 9.49 and that of the constant loading rate strategy also decreases from 5.85 to 4.96. Cv values of the square current increasing loading rate strategy keep below 3.85 under conditions of the three stack temperatures and display a slight fluctuation during the whole current loading process, which indicates that the strategy can effectively make the stack being of an excellent voltage uniformity during the instantaneous response process.     

A directional control method for interface flow considering static voltage stability

A directional control method (DCM) for power flows on a set of interface lines between two regions of power system considering static voltage stability margin is developed in this paper. A surface approximation approach is firstly used to obtain the relationship between the interface flow solution and the generation direction of generator (the portion of generation variation in each participating generator to satisfy the desired power increase on the interface and the system loss). Then, an optimization model is built to determine the optimum dispatching scheme of generators. This method not only can control the total power on the interface to satisfy the power demand but also can realize the directional control of power on each interface line based on the needs of operation. The proposed DCM is further extended to determine the optimum dispatching scheme of generators for maximizing the interface flow margin (IFM), which is the active power margin of the key transmission lines between two regions of power system constrained by static voltage stability. A modified continuation power flow (MCPF) is used to show and evaluate the impacts of the DCM on the IFM. The New England 39-bus system and the IEEE 300-bus system have been employed to verify the effectiveness of the DCM.     

巨型水电站孤岛试验期间AVC电压波动的解决

本文首先分析国内典型的AVC的一般配置、控制策略和控制原理,针对巨型水电站孤岛试验期间的AVC控制的复杂工况进行阐述,对出现的AVC电压波动的情况进行分析,并对采用的解决方案进行介绍,为今后类似电站的孤岛运行期间的AVC电压控制提供一些参考建议。